Wheel Spacers Kit KTM Husaberg Husqvarna Front All-Balls

Spacer Kit All-Balls for wheels of off-road motorcycles (off-road) and supermotard. The off-road use generates infiltration of water and dirt between the mating surfaces causing grooves causes of leaks making access dirt on the bearings and ruining them. With each change of bearings / dust wheel always recommended to check and replace the spacers with kits All-Balls.

NOTE: the photo is for demonstration purposes only, each bike has its specific kit includes all necessary to regenerate the wheel spacers

Besides the models in the table compatibility is also applicable to the following models:

KTM XC 150 (from 2010)
KTM XC 250 (since 2006)
KTM XC 300 (from 2012)
KTM XC 450 (2004 - 2006/2007)
KTM XC 525 (2006/20072)
KTM 250 XC-F (since 2007)
KTM XC-F 450 (2004 - 2006 to 2009 - from 2013)
KTM XC-F 505 (2008/2009
KTM 250 XC-FW (2007)
KTM XC-FW 350 (2012)
KTM XC-W 200/250/300 (since 2006)
KTM XC-W 400 (2009/2010)
KTM 450 XC-W (since 2007)
KTM XC-W 500 (from 2012)
KTM XC-W 525 (2007)
KTM XC-W 530 (2009-2011)
KTM XCR-W 450/530 (2008)
KTM MXC-G 525 (2004/2005)
KTM EXC-G 450 (2006/2007)
KTM EXC 500 (from 2012)
KTM SXS 125/250 (2004)
Husqvarna XC 250 (since 2006)
Husaberg FC 450/650 (2004/2005)
Husaberg FE 250/350 (from 2013)
Husaberg FE 390 (2010/2011)
Husaberg FE 450 (2009-2011)
Husaberg FE 550 E (2007/2008)
Husaberg FE 650 E (2004-2008)
Husaberg FX 450 (2010/2011)
Husaberg TE 250/300 (from 2011)