Charger Battery Optimate Pro-1 Duo

Innovative automatic charger sulphation to 9 stages. Integra diagnostic checks and a special automatic reset mode in several stages for deeply discharged batteries (sulfated). Suitable for the first charge of the essential MF AGM sealed batteries for motorcycles, etc., and for daily use on all lead-acid batteries or conventional sealed 12V used on scooters, motorcycles, ATV / Quad, watercraft and snowmobiles and equipment maintenance with external power.

Ideal also for VRLA batteries, batteries with gel electrolyte, spiral cell and batteries for deep cycles at 12 V generally used for

• trailers electrical engines
• golf trolleys and battery-powered vehicles and machines.
• standby power

The system of automatic winding dell'OptiMate PRO-S is controlled by the exclusive and highly advanced microprocessor ampmatic „¢ TecMate. This system automatically adjusts the charging current in a continuous manner, at an optimal level for the single battery to which it is connected. This is done within the selected limit, depending on the state of charge of the battery, the state of operation and the storage capacity of electricity (Ah). For example, if the current erroneously selected is 4 amperes for a battery with a rated capacity of only 4 ampere (and without internal short circuit), the microprocessor ampmatic „¢ automatically and continuously adjusts the current on any low level optimal for the electrical characteristics of the battery .

Select output: NEW (new) / 2/4 Amp:

The selection NEW (new) is bound specifically to the first charge of essential new AGM MF motorcycle batteries, as well as the more traditional batteries. Selecting NEW (new) are omitted stages of special recovery mode and the program starts directly phases of charge, pulsed absorption and charge control, limited to 60 minutes total.

For charging batteries not new, the selection table on the charger indicates selections appropriate to 2 amps and 4 amps, ampmatic regulated by the microprocessor, which automatically reaches the optimal charge faster for any battery connected.

• The circuit output is initialized to any battery, maintaining at least 1.8 V. The output is disabled when it discovers a connection to a battery.
• 10 minutes after activation, an automatic check indicates possible short circuits of the cells (red LED).
• Automatic detection of deeply discharged batteries (sulfated) + progressive recovery mode in 3 phases.
• The constant current regulated by the microprocessor Ampmatic „¢ optimally recharge the battery in no time.
• The timed phases of absorption and verification to complete the charging pulses and help to riequalizzare cell voltages, guaranteeing the achievement of an optimal charge of the first test cycle.
• After verification of the best possible charge, the surface tension is eliminated while a timed test checks autodownload excessive, with 5 possible results displayed on 3 LEDs.
• If the initial result of the test is "GOOD", the test is automatically prolonged for 12 hours to control the initial result.
• The floating charge hourly maintenance 30 minutes keeps the battery to a full charge optimum, never overload it.
• It is also ideal for optimal recharging of batteries and used for maintaining long battery charge in stock.
• The integrated handles for wall mounting allow a quick and easy assembly in the working station.
• Supplied with detachable replaceable connection set with battery clips.
• Input power selectable for 115 / 230V. Detachable power cord.
• Manual complete illustrated in eight languages.
• Comprehensive automatic electronic protections against user errors, with elimination of sparks.
• Complies with all standards EN and IEC and relevant EC directives.