Battery Charger Optimate Lithium 0.8A (Tecmate) - Maintainer Tester

Charger, charge maintainer, optimizer and tester with automatic diagnosis for lithium Iron/Phosphate (LiFePO4/LFP) 12V from 2 to 30 Ah.

Features:

• First criteria with control of the state of the battery and ambient temperature.
• Control shorted cells and / or faulty.
• Recovery mode 'of low-voltage protection system "Safet" and charge control.
• Step mode 'main charging current controlled by the microprocessor, with program with load curves ideal for LiFePO4 batteries.
• Absorption step and equalization of the cells with supply of current to voltage pulses controlled between 14.0 and 14.3 V
• Charge verification and test retention without current supply. 2 test results possible. Charge time limit of 24 hours, holding time unlimited.
• Alternating cycles of testing and maintenance of 30 minutes each for every hour for 12 hours.
• IP54 sealed container, with plates for wall mounting integrated.
• Dimensions 167x65x46 mm. Charging current 0.8A. Power supply 220/240V.
• Total electronic protection against reverse polarity
  

Not suitable for lead batteries, Nickel, NiCd, NC, NiMH, lithium-ion, lithium-polymer, non-rechargeable batteries and dry cells.

Multilingual instructions included in the package, with cable clamps (SAE-74) and cable eyelet (SAE-71)